Click to enlarge

Pneumatic Pipe Joint Test Robot

Pneumatic test system for testing the connections of pipes used in pipeline installations is a test method with air without the use of liquids and consumables.

Pipe joint test system is placed inside the pipe section to be tested. The test system creates a closed-loop pressure medium within the pipe and monitors the pressure of the medium for leakage and / or pressure loss in the pipe section to be tested.

Method is characterized in that the device comprises a first wall portion including a first sealing means and a second wall portion comprising a second sealing means.

If the pipe section to be tested, in particular the connection point, is between the first wall portion and the second wall portion; the sealing means of the first wall portion is brought more tightly to the inner surface of the pipe. The sealing means of the second wall portion is brought more tightly to the inner surface of the pipe. The pressure medium is brought into the chamber cavity delimited by the first wall portion, the second wall portion, and the inner wall surface. The pressure in the pipe section is measured. It detects if there is a possible leakage of the pressure change or pipe section.

GET OFFER
PHONE
TECHNICAL DATA
CERTIFICATES
GET OFFER
PHONE
TECHNICAL DATA
CERTIFICATES
Click to enlarge
Description

    • Features of Pipe Joint Test Robot:

      Testable pipe types: GRP – Corrugated – Corrugated Triplex – PE – PVC – Steel – Ductile HDPE

      For HDPE Pipe Joints: It can perform cutting and inserting the inner lips formed at the joint site.

      Auto Control: Determination of ovality in pipe

      Imaging: In-Tube Ultra HD Camera

      Lighting: Led

      Distance Measurement: Determination of pipeline length

      Marker: Laser

      Temperature Detection: 3m optical heat measurement

      In-pipe surface quality detection: In-pipe 360 ​​° Rotation Ultra HD Camera

      Temperature Detection: In-pipe ambient temperature detection (lip stripping for pipes for HDPE)

      Pressure Test: Creation of working pressure and working test pressure by forming air cell under 175 psi pressure (12 bar)

      Pressure Equipment: Mono block compressor 50 lt.gf

      Pipe Joint Test: Oring and Gasket Tests

      Limit Speed: 1m – 24 m / min.

      System Control (Optional): Wi-fi, bluetooth and Cable

      System Energy: DC 24 Volt

      Reporting: Pressure test, Length, Ovality, EXCEL formation and Imaging Record HD Mp4 format.

      Warranty: 2 years.

GUIDE

Related products