Pneumatic Internal Pipe Clamp
- Pneumatic internal pipe clamp is an outward opening mechanism designed to apply a radial force out through the pipe.
- During the welding of the pipe; it allows the two pipe ends to be connected, aligned and the pipes are held in the same axis.
- This clamp has two independent force mechanisms actuated by two double acting pistons.
- The internal radial force given to the cylinders provides a force against the outside to provide a radial linear movement of the mechanism and the alignment is formed.
- The pneumatic internal pipe clamp does movement in the pipe manually or with the motor movement.
- Manually / automatically adjusts the brake pads to the inner walls of the pipe to stop movement of the internal clamp in the pipe.
- Clamps can be used to lay thousands of kilometers of pipelines even in the most challenging terrain.
- All models can operate in terrain slopes and special production is made for different terrain conditions.
- These models are suitable for pipes that which the pipe thickness is up to 25mm.
Description
- Due to their mechanical structure, these clamps can be left on the pipe for a long time during installation.
- Depending on the pipe diameter, double chain is used in heavy type pipes and single chain is used in light type pipes.
- The trapezoidal screw tension chain tensioner is wrapped around the structure pipe with shoes and double row of chains passing through the shoe housing.
- The mechanism that encircles the pipe surface by means of shoe contact around the circumference applies force by compressing it with the trapezoidal screw tension chain tensioning mechanism.
- Chain Clamp is capable of mechanical movement with its chain extension and movable legs.
- You can adjust the contact pressure shoes at any interval.
- Chain clamps can correct deformations with the pipe end outward.
- It is possible to adjust the joint spacing distance from 0 to 12mm.
- Angle of 0 ° to 5 ° can be formed at the weld joint.
- The compression force can be adjusted easily by manual trapezoidal tensioning screw.
- Trapezoidal screw tensioning process is fast
- The circular clamping force on the pipe is formed by multiple shoe contacts.
- After alignment circular clamping, you can unloosen the trapezoidal screw on the chain tensioner by turning it to the left.
- It is recommended to use in pipes with wall thicknesses of 4 mm to 20mm.
- If necessary, the block parts are easy to separate and the block parts are replaceable.
- This versatile handy tool consists of the main body and steel wall with intermediate wall.
- Our products are manufactured using precision laser technology and CNC technology.
Our products are guaranteed for 2 years.
